Revere, Massachusetts

Window Installation in Revere, MA

Built around how Revere homes are actually built. Two-families and triple-deckers inland, beach cottages and bungalows near the water. We write the quote down, and we don't follow up unless you ask.

A golden-hour view of a Revere street of two-family and triple-decker homes with a glimpse of Revere Beach in Revere, MA15 Waite Ct., Malden, MA 02148
CrewFactory-trained installers
QuoteWritten, on the spot
Located at15 Waite Ct., Malden, MA
Who we are

New Sash installs windows and doors across Revere, from our shop in Malden at 15 Waite Ct., a short drive east. Revere runs dense and coastal: two-families and triple-deckers in West Revere, bungalows up in Beachmont, and beach cottages and raised homes out at Point of Pines and Oak Island. Salt air is hard on hardware near the water, so the spec matters. The quote stays in writing, the price is what you take home, and the crew on quote day is the same crew that installs.

Revere housing stock Built for the homes Revere actually has.

Five housing types make up almost every Revere block. We name them before we name the product, because the installation method changes for each.

A two-story West Revere two-family home with stacked entries and double-hung windows in Revere, MA
Two-family

West Revere two-family

Stacked entries and double-hung sashes on both floors, the densest part of Revere's housing. Most pre-date the modern standard rough opening, so we build the order to the actual hole, not a catalog number.

What to watch Sashes painted shut over decades of tenancy. We free the opening and set a unit that actually operates.

A three-story Revere triple-decker with stacked porches, bay fronts, and double-hung windows in Revere, MA
Three-story

Revere triple-decker

Rope-and-pulley double-hung windows and bay fronts, the same pattern as a Malden triple-decker. Weight pockets and bay sightlines have to be respected.

What to watch Sash weights cut from the pocket during a prior remodel. We rebuild the pocket before the new unit goes in.

A single-story Craftsman bungalow on a Beachmont hillside overlooking the bay in Revere, MA
Bungalow

Beachmont bungalow

Up on the Beachmont hills overlooking the bay, low bungalows with wide front windows and shorter upper sashes. The slope means no two openings sit at quite the same height.

What to watch Wind-driven rain off the water. We flash and seal for the exposure, not just the opening.

A raised shingled beach cottage with double-hung windows near Revere Beach at Point of Pines in Revere, MA
Coastal

Point of Pines beach cottage

Out at Point of Pines and Oak Island, beach cottages and raised homes at the end of Revere Beach. Salt air corrodes ordinary hardware, so the spec has to suit the exposure.

What to watch Salt-air corrosion on sash hardware and balances. We spec coastal-rated hardware near the water.

A story-and-a-half cape with front dormers on an inland street near Riverside in Revere, MA
Story and a half

Riverside cape

Inland around Riverside and North Revere, story-and-a-half capes with dormer windows that rarely match the main-floor sizes. We measure the dormers separately and order custom on the second floor.

What to watch Dormer flashing that has lived through twenty winters. We pull the flashing and reset it with the new unit.

No two Revere homes take the same window. Get a written quote for yours.

Get a written quote
What we install

Sized to the actual rough opening. Not a catalog.

Double-hung
Casement
Awning
Picture
Slider
Bay or bow

Vinyl is the workhorse for most Revere two-families and triple-deckers. Fiberglass is the upgrade when you want a longer warranty and a tighter thermal break, and it holds up well to salt air near the beach. Wood-clad fits an older single-family where the interior trim is part of the look. We do not lock you into a brand.

Energy Star rated, argon-filled, low-E coating. The U-factor goes on the quote in writing, before you sign. See the rest of our window installation services or read about entry doors and patio doors for a Revere home. Wondering what a Revere window project runs? See our guide to window replacement cost in Massachusetts.

How it works

The quote stays in writing.

Step one

Walk-through

We measure the openings, look at what is in the way, and ask what is bothering you about the current windows.

Step two

Written quote, on the spot

Itemized: unit count, sizes, glass package, install method. No follow-up call required.

Step three

One 24-hour check-in

Optional. If you have questions overnight, the same crew picks up the phone. No second pitch, no new pricing.

Step four

The price you take home is the price you pay.

One signed quote, one install date. If something is wrong after we leave, the same crew comes back.

A Revere home in winter with snow on the ground and warm light glowing through its new windows
Winter installs

Winter installs are routine.

One window out, twenty to thirty minutes, then sealed. The house is never open to the weather. We install year-round across Revere and the Greater Malden area, including January and February. Only need a sash or a hardware fix? That is a window repair in Revere, not a replacement, and we will tell you how we weigh repair against replacement.

Get a written quote
Where we install

Revere, every neighborhood.

  • Beachmont
  • Point of Pines
  • Oak Island
  • Shirley Ave
  • West Revere
  • North Revere
  • Riverside
  • Revere Beach
  • Northgate

Plus the surrounding towns we serve across the Greater Malden area: Malden, Medford, Melrose, Everett.

Questions

Questions homeowners ask before they sign.

Do I need a permit for window replacement in Revere, MA?

Yes for any job that changes the rough opening; like-for-like replacement is typically over-the-counter at the Revere building department. You file as the homeowner, and we walk you through what the application needs (window count, sizes, locations, U-factor) before your install date. Pre-1978 homes also trigger EPA RRP Rule requirements; we follow lead-safe work practices on those jobs.

Do you install windows in winter?

Yes. Winter installs are routine for us. One opening at a time, 20 to 30 minutes open per opening. We work year-round across Revere and the Greater Malden area.

Can you install windows in an older Revere two-family or a home near the beach?

Yes. Older rough openings in Revere two-families and triple-deckers rarely match modern standard sizes, so the install needs custom sizing. Near the water we also spec coastal-rated hardware so salt air does not seize the new sash. We measure twice and build the order to the actual opening, not a catalog number.

How long does a typical Revere window installation take?

Most jobs are single-day. A typical 10 to 12 window Revere home wraps in one day with our crew; larger triple-decker or multi-family jobs may run 1 to 2 days. We work one opening at a time so the house is never open to the weather.

Get a quote

Get the quote in writing. Then take it home.

Walk-through, on-the-spot itemized quote, one 24-hour follow-up if you ask for it. No second pitch, no new pricing.